path: root/hw/bbcpu.sch
AgeCommit message (Collapse)AuthorFilesLines
2016-12-31hw/: add 50 mil headers and ribbon cable holes (header.fpd from kicad-libs)Werner Almesberger1-1/+1
2016-12-30hw/: use qfn:QFN24-VGGD-8 from kicad-libs for XRA1201*Werner Almesberger1-2/+2
2016-12-29bbcpu.sch, fp-lib-table (U2302): use ssop:TSSOP-16Werner Almesberger1-1/+1
2016-12-29hw/: let cvpcb fix incomplete footprint associationsWerner Almesberger1-32/+32
2016-12-28hw/: use STQFN-20 (for Silegos) from kicad-libsWerner Almesberger1-1/+1
2016-12-20hw/: kicad hamster wheeling some moreWerner Almesberger1-0/+1
2016-12-20hw/: kicad feeling restless ...Werner Almesberger1-1/+0
2016-12-11bbcpu.sch (U2301): change XRA12101 to XTA1201P (with pull-ups enabled on reset)Werner Almesberger1-1/+3
Having pull-ups on is a little more convenient than not having them (and thus needing pull-downs in some cases).
2016-12-03bbcam.sch, bbcpu.sch, bbdisp.sch: fix part number of 852-10-100-10-001000Werner Almesberger1-38/+12
2016-11-29bbcpu.sch, bbdisp.sch: add pull-ups for I2CWerner Almesberger1-13/+85
I2C#2 has DNP ("DNI") pull-ups on BB-xM, so we may as well add them on v2. I2C#3 has 10 kOhm pull-ups on BB-xM, inside U12, so we make them DNP on the v2 side but have them "just in case" (space is cheap on the v2-BB-xM interface). Suggested by Ana Martin Ayuso.
2016-11-23hw/: (check and) indicate I2C addressesWerner Almesberger1-0/+2
2016-11-23neo900.pretty/BBCONN.kicad_mod, bbcpu.sch, bbdisp.sch: fix pin namesWerner Almesberger1-3/+1
The original "BEAGLEBOARD" footprint used pin names that were incompatible with KiCad and got mangled during conversion. We fixed that in the schematics component a while ago, but not in the footprint itself.
2016-11-18hw/: add/improve commentsWerner Almesberger1-2/+8
2016-11-18bbcpu.sch, bbdisp.sch: don't use value for "BEAGLEBOARD" connector groupWerner Almesberger1-1/+3
2016-11-15bbcpu.sch: add resistor to LED, just in caseWerner Almesberger1-13/+29
2016-11-15bbcpu.sch, bbdisp.sch: correct P2301 component references (and un-split)Werner Almesberger1-4/+4
2016-11-14bbcpu.sch: assign bidirectional signals to tri-state-capable Silego pinsWerner Almesberger1-12/+12
Tri-state-capable means that there is an OE signal that can be changed by the logic (and not just by configuration).
2016-11-14replace "SLG46531" (SLG46531V) with SLG46533VWerner Almesberger1-2/+3
The SLG46531V seems to get phased out. The SLG46533V is a suitable replacement.
2016-11-13re-annotateWerner Almesberger1-20/+20
2016-11-13hw/: reset annotations and re-annotate everythingWerner Almesberger1-27/+27
2016-11-13neo900_SS_34.sch, 35, 36 -> bbcpu.sch, bbcam, bbdisp; XM -> xM in titlesWerner Almesberger1-0/+799