Lock status:

This option allows the locking of NVM code in the programmed chip, preventing a subsequent read of the chip NVM sequence.

Pattern ID:

An 8-bit code programmed onto the chip that can be used to identify the NVM code programmed onto the chip.

Power Supply Control mode:

• None: Some devices are all-digital devices; there are no analog components. Therefore, this parameter does not apply.

GPIO quick charge:

During the POR sequence, a 2kΩ resistor is connected in parallel to any configured pull-up/down resistors. The 10K, 100K and 1M GPIO Pull-Up/Pull-Down resistors are not enabled until POR so the quick-charge option can help inputs get to the right voltage faster, especially if there is significant capacitance.